2016年7月29日星期五

Update: Honda HDS Update to V3.101.015 !

Update: Honda HDS Update to V3.101.015 !

6 Highlights to get Honda HDS:

1. Software Version: 3.101.015  This Version No Need Activation
2. Support VIN Reader and IMMO.
3. Test Coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc.
4. Honda HDS HIM supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform.
5. Use Z-TEK USB1.1 to RS232 Convert Connector together, It is easy to use Honda HDS on the computer that without COM port
6. Support Honda vehicles from 1992-2016 year

V3.101.015 Honda HDS HIM Software Display:

2016年7月27日星期三

How to use NitroOBD2 chip tunning box to do Coupe engine benzyl gas NGV?

How to use NitroOBD2 chip tunning box to do Coupe engine benzyl gas NGV?

Preparation: Install the NitroOBD2 chip tunning box software.

Step 1. Stop the engine. Pull the key out of the switch
Step 2. NitroOBD2 OBD2 plug, plug in the power box mounted to three. And the ignition key slot to keep the lights on the dashboard display. (Do not start the engine)
Step 3. Press the reset button for 5 seconds the power goes off, then wait about 30-54 seconds (NitroOBD2 to establish a connection with the ECU)
Step 4. Start the engine
Step 5. NitroOBD2 chip box tuning to recognize and driving habits of you after about 200 km and NitroOBD2 chip tuning box will adjust itself to match your car perfectly horsepower, torque and fuel economy. *** OBD2 connector is located beneath the steering wheel on the driver's side ****.


2016年7月26日星期二

VPECKER Easydiag V8.2 Full System Diagnostic Tool Update to V8.2

VPECKER Easydiag V8.2 Full System Diagnostic Tool Update to V8.2

Here is a part of the V8.2 VPECKER Easydiag Diagnostic Tool update information:

1.Best Wireless OBDII Diagnostic Tool VPECKER Easydiag
2.Support total 85 brand vehicle from European, Aisan, American, contain lots of Chinese vehicle brand
3.Support Multi-language, can be used for customer from different country
One OBDII Adapter, software is completely free downloading, support online update.
4.VPECKER aimed at provide best service for customer and we are keep improving!

2016年7月24日星期日

Xhorse MVCI 3 in 1 Customer Feedback

Xhorse MVCI 3 in 1 Customer Feedback

Xhorse MVCI 3 in 1 

Q1: What is computer requirement of Xhorse MVCI 3 in 1?
A1: Windows OS (operating system) requiremet: Windows XP; 2 CPU,  2.00GB of RAM, 40GB of Local Disk (C :)

Q2: Will MVCI do Honda immobilizer programming for PCM replacement?
A2: MVCI is mainly used to diagnose, it is unstable to program.

Q3: Does MVCI work with Acura? Does it support CAN BUS? Can it diagnose ABS, SRS and Body?
A3: We suggest you not use MVCI to diagnose Acura; the best Acura diagnostic tool is Honda HDS, GNA600 and allscanner.

Q4: When I click "MVCI firmware update tool", it always says "Unable to connect to update server", the firmware version is V1.4.1.
A4: MVCI 3 IN 1 can't update firmware, do not click "MVCI firmware update tool"; it only supports update Toyota software.

Q5: After install MVCI HDS Program on Windows XP, it can read the DTC code, but it fails to clear DTC.
A5:  There are 3 possible reasons:
1) There is a poor contact between the USB interface and the computer.
2) MVCI HDS driver is not successfully installed
3) MVCI doesn’t work with your car model.

Q6:  I installed MVCI HDS software, and the green light flashes, the MVCI is activated, then I click the "select car model" button, MVCI starts to test, then proceed to the window of mileage and car model selection, I go on enter the list of subsystem and choose the subsystem, no response, all the PGM light, ABS light and SRS light flash, but Honda software prompts "No communication, please check whether the key is insert or MVCI is connected"
A6: you can enter into the list of subsystem, it means MVCI can work, but it has no response after select the subsystem, it means MVCI can't work with this car model, advice you select the other car model to diagnose or advice you use Honda HDS, GNA600 to diagnose Honda, HDS and GNA600 is best Honda diagnostic tool.

Q7: Can MVCI 3 in 1 test tire pressure for Lexus RX350, year 2010? If it can’t, would you please recommend one for me?
A7: MVCI 3 in 1 can't test tire pressure for Lexus RX350, year 2010, advice you use Autel MaxiTPMS® TS401 TPMS Diagnostic and Service Tool.

Notes:

1. Be sure to disable/uninstall anti-virus software 
Please note,anti-virus software can flag up MVCI scan tool software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our MVCI scanner software is completely safe and virus free and all other virus scanners confirm this.

If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP 
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.

2016年7月22日星期五

V143 for JLR Mangoose for Jaguar and Land Rover Software Download and Installation Tips!

V143 for JLR Mangoose for Jaguar and Land Rover Software Download and Installation Tips!

The Mangoose JLR is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mangoose JLR uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications.

3 Highlights to get the JLR Mangoose:

1. Software Version: 143
2. Supported Language: Germany, Russian, French, Dutch, Portuguese, Japanese, Spanish, Italian, English, Simplified Chinese.
3. Computer system: Win7 and Windows XP

JLR Mangoose V143 Software Installation Tips:

1. The software installation need to finished in one day
2. After the software installation, the driver needs to pass the test.
3. You need to install the Frozen software the day you install the JLR V143 software.
4. If the computer prompt the software can not use error, you need to change the computer date to the day you install the software.

JLR Mangoose V142 Software Installation Video:

2016年7月20日星期三

How To Distinguish The Original Xhorse MVCI 3 IN 1 with the Copy one?

How To Distinguish The Original Xhorse MVCI 3 IN 1 with the Copy one?

Original XHORSE MVCI 3 IN 1 is a high performance factory diagnose tool for Toyota, H-ONDA and Volvo. MVCI is a high performance factory diagnostics for TOYOTA TIS. Today we will show you how to distinguish the fake one with the original XHORSE MVCI 3 IN 1.


How to identify copy MVCI:

1. No color box.
2. Copy MVCI has a different OBD interface from the original MVCI.
3. Apply the old USB communication way and easy to be offline when using it.
4. The circuit board of the copy MVCI is completely different from the original one: it is the earier simplified version.
5. It does not support online update. It exists many BUGS, and copy MVCI firmware version is V1.4.1. While the original NVCI firmware version is V1.4.7.
6. Actually, copy MVCI is our HDS cable with an alternative shell and a different driver.

SKP-900 Key Programmer Latest Version V4.2 Updated !

SKP-900 Key Programmer Latest Version V4.2 Updated !

SKP-900 Key Programmer V4.2 Information Updated

1.  DODGE RAM-1500 Smart Key Program
2.  BUICK Excelle Remote Key Program 2015-
3.  HUMMER H3 Remote Program
4.  Chevrolet SAIL Remote Program 2015-
5.  MAZDA CX-5 Add Smart Key Program
6.  BUICK ENVISION Smart Key Program
7.  TOYOTA Replace the new immo box Program
8.  VW POLO Remote Program 2015-
9.  Fiat Bravo Remote Key Program
10. Audi A4 Remote Program

Learn How To Update SKP-900 Key Programmer:

1. Connect SKP-900 to the computer using the USB cable,
2. Click OPEN to open the update bin file,
3. Click Auto Scan Port button to setup the COM port,
4. Click ACTIVATE button to start update.

2016年7月19日星期二

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Preparation:

Tacho Pro 2008 July PLUS Universal Dash Programmer

Use this board and clip:


Operation Steps:

• Remove the cluster and open it.
• Remove the motors carefully from the circuit board. Do not pull off the needles!!!
• Look for the 8 pin chip 93C46.
• Look for the silver chrystal and join its contacts.
• Connect the clip to Port 1.
• Put the clip on the chip 93C46 (red on pin 1).
• Select the menu: Citroen-Xsara
• The Tacho Universal shows you the old value.
• Select the menu Adjust KM.
• Enter the new value.
• Verify the new value with OK.

2016年7月18日星期一

Using VBOX-VOLVO XC90 Diagnostic Tool In Correct Way

Using VBOX-VOLVO XC90 Diagnostic Tool In Correct Way

2016 VBOX-VOLVO XC90 is using DOIP communication diagnostic mode, the old VOLVO VTDA DICE detection hardware has been unable to provide diagnostic services.


Let's look at how to use VBOX-VOLVO XC90

1. Connect to hardware, insert the box into OBD interface, connect the box with internet reticle and computer reticle interface, red light sparkling. You can find the OBD interface on the left side down of the seat.


Hardware lights instruction

LED status Status instruction
Red light sparkling hardware working ok
Green light sparkling data communication status

2. UDVOLVO is a free install application, decompression zip package to local computer folder, run the application…/Volvo/ASAMMCD3/UDVolvo.exe press enter after you find your vehicle IP.


3. Press“Vehicle identification number, read ECU information, read fault number


4. Double press “current fault code number”, enter single ECU
Press“current fault code number or history fault code number”, press the right button on mouse go check for detail information.


5. Check the detail information.


6. Check the fault code number detail information.


7. Check ECU detail information.


8. Enter ECU read fault code number history fault code number, clean up code number, read vehicle identification number and ECU detail information, press current “current fault code number and history fault code number” to clean up the fault code numbers.

2016年7月16日星期六

Which is Better FGTECH Galletto 4 V54, Kess V2 and Ktag ?

Which is Better FGTECH Galletto 4 V54, Kess V2 and Ktag ?

Compared with these ECU Chip Tuning,the differenced between FGTECH Galletto 4 V54,Kess V2 and Ktag are as below,after you reviewing it,hope it will be helpfui for you to learn how to choose.

2016年7月15日星期五

KESS V2 OBD2 Manager Tuning Kit No Tokens Limitation Technique Support

KESS V2 OBD2 Manager Tuning Kit No Tokens Limitation Technique Support

About Installation and Usage 

Q1: Where to download KESS V2 driver?
A1:You can contact our customer service for the download link.

Q2: When KESS V2 read ECU, I got checksum error.
A2: Please search“visual C++ 2005 library" on Google, then download it and install it, this error will be solved.

Q3(1): How does KESS V2 checksums work? Does KESS V2 automatically confirm and rewrite? Does KESS v2 work with truck? Such as: Mercedes MP1/MP2/MP3 or MAN TGA.
A3(1): After reading the software, kess v2 will automatically calibrate checksums. KESS V2 doesn't work with truck, because the truck voltage is too high and KESS V2 will be burnt out.
Q3(2): Then K-tag work with truck?
A3(2): Yes, it does.

Q4: How to connect KESS V2 to K-LINE med 17, do you have any manual or diagram?
A4: If your car is OBD diagnostic socket, just plug the OBD cable into the car; if your car is not OBD diagnostic socket, after you select the ECU type in the KESS V2 software, the diagram will appear and show you how to connect (see the following pictures)


Compared with Other ECU Programmers 

Q1: What's the difference between KTAG and KESS V2?
A1: KTAG and KESS V2 share the same software, but KESS V2 has OBD function (means KESS V2 program ECU by OBD diagnostic cable) while KTAG doesn't have.

Q2:  What's the difference between KESS V2 and FGTech Galletto 2?
A2: Both KESS V2 and FGTech Galletto 2 work with a number of cars, but they program ECU via different ways. Fgtech program ECU by BDM (in another word, FGTECH has BDM function), but KESS V2 doesn't support, Kess V2 has Anti-mediation lock module, it is better in working with new and encrypted cars than FGTech Galletto 2.

About KESS V2 Function 

Q1: Kess V2 describes “9. Full integration with ECM Titanium" but I didn't find it has ECM Titanium.
A1:  You misunderstood, this sentence means KESS V2 can work with ECM Titanium, not means KESS V2 contains ECM Titanium. KESS V2 is an ECU programming tool, and ECM Titanium is a set of programming software for adjusting power.

Q2: Does KESS V2 support remapping the ECU? Or it can only read and write ECU?
A2: KESS V2 doesn’t support remapping the ECU.

2016年7月14日星期四

How to use V2014.1 Multi-Diag Access J2534 to program Mercedes Benz FM Front Module?

How to use V2014.1 Multi-Diag Access J2534 to program Mercedes Benz FM Front Module?

Tool Prepared:
I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device
A laptop running Windows XP or Windows 7 O/S

Procedure:
1. Install the I-2014 Multi-Diag Access J2534 Pass-Thru software follow the video instruction:https://www.youtube.com/watch?v=9YAE748y-ZI
2. Connect I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 interface with vehicle via OBD socket.
3. Run software.
4. Select vehicle manufacturer: Mercedes Benz from main screen.
5. Select vehicle model: Actros II, then select control unit module from the right column: FM Front Module.
6. Select correct engine type.


7. The next program will bring various of technical data, like clutch freeplay, cylinder bore, maximum power, oil pressure in idle etc.


8. Select Compression radio option>>Inspection of injection timing>>battery>>Cylinder heat bolts>> Minimum front brake pad thickness, confirm engine type.


9. Select INTERVERS and then choose "Change towed axle hub lubricant and check
tapered-roller thrust bearing". Then select "Change hydraulic transmission brake fluid".
10. Press the wiring icon, the Multi-Diag J2534 VCI program will display the FM Module diagram.


11. Pull download the drop-down list under COMPONENT tab to check other modules, height sensor, front axle, brake pad wearing sensor, right wheel etc.
12. Follow the system prompt until the procedure is done.
13. Exit the Actia Multi-diag software and disconnect VCI interface from vehicle.

2016年7月13日星期三

SPX AUTOBOSS OTC D730 Scanner Newly Released!

SPX AUTOBOSS OTC D730 Scanner Newly Released!

What items are included in the package of D730 Automotive Diagnostic Scanner?


With OTC D730, what can you do?

1. Access to powertrain, chassis and body systems
2. Quick Test function to test most vehicle systems
3. Fault codes (DTC’s), Data Stream and Service Reset
4. Actuations, Adaptations- and Control Module Coding
5. Supports Multi-language for an international marketplace
6. Frequent Internet based software updates
7. CAN Bus with high/low speed
8. One OBD II/EOBD connector for all CAN Bus systems
9. Demo Mode for many OEM’s
10.Data graphing
11.Self-check function
12.Print data with the built-in printer.

What system does OTC D730 scanner support?

1.Chassis :
SBC – Sensortronic Brake Control
ESP – Electronic Stability Program
AIRmatic – AIRmatic ABC
TPC – Tyre Pressure Monitor
ABS – SRS

2.Body:
Seats and Doors
Actual Values
Actuations
Initial Startup
Control Unit Adaptations
Correction Programming

3.Air Conditioning:
AAC – Automatic Air Conditioning
REAR AC – Rear Air Conditioning
STH – Stationary Heater
HSW – Heated Steering Wheel

4.Informatio n and Communication:
ICM – Instrument Cluster
SCM – Steering Column Module
PTS – Parktronic System
Audio, Video, Navigation
Telematics

5.Drive:
Transmission
ESM – Electronic Selector Module
DTR – Distronic
Motor Electronics
Idle Re-learn
Diesel Injector Coding
Diesel Pump Initialisation
DPF Regeneration

What are the vehicle brands OTC D730 supports?

1.European Vehicles : Audi, BMW, Citroen, Fiat, Ford, Jaguar, Lancia, Land Rover,Mini, Mercedes-Benz, Opel, Peugeot, Porsche, Renault, Seat,Skoda, Smart, Volkswagen and Volvo
2.American Vehicles: Chrysler, Ford and General Motors
3.Chinese Vehicles: Chery, Foton, Geely and Great Wall
4.Asian Vehicles : Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda,Mitsubishi, Nissan, SsangYong, Subaru, Suzuki and Toyota
5.AUSTRALIAN Vehicles : Ford and Holden

2016年7月12日星期二

OBDSTAR F100 F108 X100 pro X300 PRO3 X300M, Which Key Programmer For Me?

OBDSTAR F100 F108 X100 pro X300 PRO3 X300M, Which Key Programmer For Me?

Recently, the OBDSTAR firm release several key programmer and mileage adjustment tool, some for specialized brands, some for multi-brands. Here lists a comparison tables of OBDSTAR F100 for Ford&Mazda, F108 for Peugeot&Citreon, X100 pro, X300 PRO3,  X300M for odometer correction.




2016年7月11日星期一

OBDSTAR X-100 PRO Mileage Change Function Tested Model

OBDSTAR X-100 PRO Mileage Change Function Tested Model

OBDSTAR X-100 Pro is a new tool for key programing. But this new tool can also do mileage correction.We shared the tested car model for you to have a look.

OBDSTAR X-100 Pro Tested Yes for the Following Models for mileage change:

1)VAG group vehicles:

Audi A3 is on the list from 2003 – 2006, 2007- up personally I have not tried
Volkswagen Tiguan 2013 TFT color dash nec+24C64 ok
Volkswagen caddy 2014 white meter NEC24C64 via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Seat Ibiza 2014 Via obd ok
Volkswagen Polo 2014 with NEC24C64
06 a8 OK
2013 golf with black/white screen – OK (with latest update)
Q5 2013 via obd ok
Tiguan 2012 tft color NEC24C64 ok
Volkswagen Polo 2014 White Meter NEC24C64 using golf menu OK

2)Hyundai

Hyundai verna fluidic obd ok
hyundai accent 2012 by obd ok 24c16
Hyundai Creta D70F3525 ok
Hyundai Verna 24c16 ok

3)Kia

Kia Sportage with 24c16 2012 work perfect
Kia sorrento 24c16 al ok obd

4)Opel

Opel Isignia 2011 works well via obd
Astra J 2010 ok
Opel Insignia 2009/2011 OK

5)Others

Chevrolet Cruze 2010, 2011, 2012 via obd Ok
Range Rover Evoque 2013 via obd ok
Jeep compas 2014 for obd2 2008+
I20 24c16 ok (Note: if you WANT TO DO KM IN HYUNDAI I20 THEN YOU HAVE TO PUT KM 4 TIME MORE EX. 1000 KM NEED THEN PUT 4000 KM IN X100.)
2006 Chrysler 300c -> will do dash via obd but won’t do SRI
Hummer H2 2008 via obd ok
2014 Altima Via obd ok
i20 by obd ok ….. so i had to make the x4 solution given on this thread example for 25300km = 25300×4 ; sometimes gives 9999999 some times 564873248 whatever but keep trying 1 or more number more on total.
Rio obd ok

X-100 Pro Failed Car Model:

Ibiza 2015 failed
Car had 110,581 kms x100 displayed 442,xxx kms
Volkswagen Polo 2012 with Nec+95320 can’t do it, security access failed
AUDI a3 2011 not work, advise you can do it with vvdi, vvdi2
2006 chrysler pacifica immo no connection (8th November, 2015 update)
Hyundai Verna Fludic 2015 pertol but no communication with x 100(20th November, 2015)
98 beetle NOT OK(22nd November, 2015)
Volkswagen Caddy 2015 white meter with NEC24c64 failed (27th November, 2015)

2016年7月8日星期五

Super VAG K+CAN V4.6 FAQ

Super VAG K+CAN V4.6 FAQ

Q1: How can I update the Super VAG K+CAN V4.6 to V4.8?
A1: Sorry, it can not update now. Once update, it will cause a blue screen.

Q2: Does the super Vag k+CAN V4.6 can read the read live data on 2002 Seat Ibiza?
A2:Yes. In theory, it can do. You can have a try. But we recommend you to use the VAS 5054a.

Q3: I want to buy the Vag k+CAN V4.6 to change the mileage of my toyota 2011. Can this tool do my car?
A3: Sorry to tell you that it can not. You need to use thedigimaster3 to do your car.

Q4: If the Vag k+CAN can reset the Service Due Indicator of 2011 Audi A4?
A4: Sorry, it can not.

Q5: If the Super VAG K CAN V4.6 can change the mileage of the VW Touaran 2007?
A5: Sorry, it can not do.

Q6: How to slove the Super VAG K-CAN 4.6 “Operate Fail (56) error?
A6: The error message showed that the communication failed.

Q7: Can the Super VAG K+CAN V4.6 do the service light/ service reset of Audi?
A7: Sorry, I suggest you to use the VAS 5054A to do.

Q8: I can not use the Super VAG K CAN V4.6 to do my Audi A4 B5 from 1998 and Polo 6R from 2011. Can you tell me why this happened?
A8: This tool is not very good for the Audi cars. If you use it on Audi,  it is very easy to break the tool.

2016年7月7日星期四

How To Use XTOOL X-100 PAD Tablet Key Programmer To Activate

How To Use XTOOL X-100 PAD Tablet Key Programmer To Activate

XTOOL X-100 PAD Tablet Key Programmer is the first tablet key programmer in the word! It not only provides customers with professional key programming, but also the most needed special functions for workshop such as odometer adjustment,oil reset/engine oil light reset,pin code reading and so on. But before using XTOOL X-100 PAD, you will need to activate. Check bellow:

1.1. Please activate X-100 PAD before you use it to test vehicles.


1.2. Input activation code, product serial number (each device will have a serial number and activation code), nickname (workshop’s name or user’s nickname), login account (can be your email address or cell phone number) and password, the system will then save it. Activation is a one time process. The diagnostic application will start after activation.

2016年7月6日星期三

Tacho Pro 2008 July PLUS Universal Odometer Correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal Odometer Correction on Ford Focus Step by Step

Tacho Pro 2008 July PLUS Universal
is one French favorite device to do mileage correction. It can do multi-brand cars than the other tool. See the procedure to do on Ford Focus bellow:

Use the Scorpio plug:


26pin white port

1.Pin 2      GND(-)          black
2.Pin 9      RX (Data)       blue
3.Pin 11     TX (Data)       yellow
4.Pin 14     12V (+)         red
5.Pin 16     12V (+)         red

Processor version 1:
• Connect Pin 1 ( left side down) and pin 2 (right from pin 1), or connect black to test point 3 (TP3).


Processor version 2:
• Connect pin 1 (middle upside) and pin 2 (left beside pin 1), or connect black to testpoint 46 (TP46).


• Remove the cluster and open it.
• Connect the cables as shown in the picture.
• Select the menu Ford-Focus
• The Tacho Pro 2008 July PLUS Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.

2016年7月5日星期二

KESS V2 WARNING: the tool is not updated

KESS V2 WARNING: the tool is not updated

Truck version KESS V2, support more trucks model than any version and Support Multi-languages.But the tool is not updated.


Symptom:

Kess v2 ksuite warning: the tool is not updated. Connect the PC to the Internet and run again the software.


Optional solution:

Try different USB cable. Some users with the same problem fixed the problem by a new USB cable .
Reflash with J-Link …
Instruction on Kess v2 Nxp flash via j-link:

https://www.youtube.com/watch?v=REqbH8D6fQs

Notice:
1. Do not update this tool online, or It will get damaged
2. Do remember disconnect internet when you use it

If you connect to internet with this clone kess v2, or make online update. The interface is destroy/broken.

1.Buy a new NPX chip with 60 tokens inside. Desolder the old NPX and change it with new. It cost 14-20


2.Or you have to weld a connector on backside of interface ,and plug the J-link programmer.
You can reset the Kess v2 to virgin.