2016年7月19日星期二

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Tacho Pro 2008 July PLUS Universal Dash Programmer Odometer Correction on Citroen Model Xsara

Preparation:

Tacho Pro 2008 July PLUS Universal Dash Programmer

Use this board and clip:


Operation Steps:

• Remove the cluster and open it.
• Remove the motors carefully from the circuit board. Do not pull off the needles!!!
• Look for the 8 pin chip 93C46.
• Look for the silver chrystal and join its contacts.
• Connect the clip to Port 1.
• Put the clip on the chip 93C46 (red on pin 1).
• Select the menu: Citroen-Xsara
• The Tacho Universal shows you the old value.
• Select the menu Adjust KM.
• Enter the new value.
• Verify the new value with OK.

没有评论:

发表评论